Braided textile ropes emitting Electroluminescent light,
plated three ropes to make a most interesting safety emergency or
decorative barrier rope.

COLOURS:
red, blue, yellow, green, or white (or multicoloured).
Note: when using the rope with a sequencer it is best to
choose three colours: one for each strand of rope,
the effect of movement for directional light is then achived.

Rope Length:

ROPES TO SUITE YOUR APPLICATIONS.
Public buildings, Amusement parks, Cinemas
Night clubs, Marinas, Swimming pools
Safety barriers (roads)
Hundreds of decorative applications
Rooms, ceilings, walls, roofs... (internal or external)
Carnival barrier rope, Street parties, Cat walks.

Frontier have developed a plated polyethylene fibre plated
rope with a central Electroluminescent light core resulting
in a radiant glow with a radial rope texture.

This rope is suitable for decorative features as well as
glowing safety barrier applications. The rope can be fixed
direct, self supported or suspended over long lengths.
The polyethylene fibres reject dirt and algae and are
resistant to acids and alkalies.

Weather proof, stable to ultra violet sunlight,
easily cleaned with high pressure water.
Impact resistant, electrically safe, cold light.

The ropes can be used for inside or
outside and underwater applications.
Various diameters can be supplied
depending upon the application.

Diameter, length, colours are to customers own specifications.

Frontier can supply almost any diameter of rope,
single ropes, braided ropes to suit or twisted,
plated , tied in knots or multi
strand for decorative purposes as a display.

Is it insulated?
The light source is contained within a PVC
extrusion which normally has another extrusion
over the top. This insulates the low
voltage making it completely safe when
covered by the rope. The insulation breakdown
voltage is 4000 volts per IEC 335-1.

Will it withstand temperature?
The EL will burn at 850 degrees C,
but the rope will melt at 170 degrees C.
It is made to operate at temperatures
ranging from -20 to 55 degrees C.

How long does it last?
The EL light source has a half life which
depends on how it is powered. At normal
operating conditions 120v and 400 Hz the
brightness will reduce to 50% after about
1000 hours and 30% after 3500 hours
of continuous use.

Can I use it for...?
EL ropes look stunning and the applications
are numerous. To get the right rope and light colour
effect for your ideas ask for advice, our technical
team will advise confidentially. This data applies to the blue
green type 02S BG. EL materials are under development
and specifications are likely to change.