For near or underwater applications
With Flange Without Flange
Specifications: |
|
27 x High intensity Luxeon LED’s |
|
|
|
50,000 hours |
|
6 x 25 deg (other beam patterns by request) |
|
White (Other colours by request |
|
12v ac/dc (other voltages by request) |
|
30 Watts |
|
‘316’ Marine grade Stainless Steel |
|
‘316’ Marine grade Stainless Steel |
|
Polycarbonate |
|
180mm diameter x 45 mm |
|
Blue, Red, Green, Amber, White or even full R.G.B Systems |
Initially Cool -Beam was developed with Swimming Pools in
mind, but given that this
very innovative light source,
with its
very robust marine, Stainless Steel housing,
and low energy LED’s, with a six years life expectancy,
and virtually no
maintenance, makes
this Cool -Beam light,
the ideal light source, for hundreds
of applications
for
near water or underwater applications
Some Applications
Public Swimming Pools, under or above water application
Super Yacht Swimming Pools or Glass Bottom Boat display lighting
Cruise ship Swimming Pools, General Deck or below Deck lighting,
Port
Starboard lighting ideal for Engine Room Flood lighting
All Commercial Shipping, including merchant Navy, Oil/Gas Tankers,
using
Intrinsically Safe Cool Beam or Armour-lite systems
Military shipping
Underwater Expiration Lighting, including
Diving Bells (special built system)
Oil/Gas industry
offshore
Exploration Platforms,
Rigs, General Lighting
including special
produced Heli-deck lighting.
Bridges, Magnetic
systems, no drilling
See separate information on Magnetic Mount Lighting
Note: Magnetic systems are ideal for many applications
that are
not possible
to drill
Cool-Beam extra components and fitting available
Varied colour bevelled flanges for volume applications,
bespoke built flanges to
suit customers specification
Magnetic Base “Permanent Magnet”solution by mounting the Cool-Beam
to a metal surface without drillinginto the metal
construction
i.e. Bridges etc.
Varied types of LED’s to suit application Battery
back up solutions
Wireless control
Lens variation (Glass
or Polycarbonate)
Note:Special systems can
be supplied to suit special
to suit
individual developments
Solid state replacement for incandescent Lighting,
for underwater or near underwater applications
The Cool-Beam LED Flood has many applications for under
water or near water applications; with its robust structure
sealed for life,
with up to 50,000 hours life, without
maintenance
it is ideal for situations under water or areas were it is
difficult to maintain Lighting.
The structure is 316 Marine Grade Stainless Steal,
which will stand up to salt water conditions;
various Flanges and Housings can be supplied
to suit individual applications. This includes
Eye-Ball fittings allowing
the Cool-Beam to be
pointed in any direction.
The Cool-Beam can be supplied with:
Blue, Green, Amber, Red or standard White,
all with the same 30 watt output,
12 volt or 24 volt AC or DC input.
“NEW” developments to be shortly launched by Frontier are
handheld controllers “Wireless” to give up to 11 commands
to the Cool-Beam Light. This will be ideal for our
New Cool-Beam Multi Colours R.G.B Systems which
will be available soon.
All Cool-Beam Lights can be fitted with Magnetic Mounts.
Frontier Limpet Magnets are sealed in Marine Stainless Steal.
The Magnets themselves are permanent Magnets sealed
for Marine applications, ideal for fitting to
Metal Structures without drilling,
Cable Mounts are also magnetic.
With all the new developments, the Cool-Beam and Armour-Lite
products are “unique” internationally and are also in
development for the Oil/Gas industry (Intrinsically Safe)
with all zone specifications and certification.
